Genius® PosiLok™
Disposable Dispensing Tips
All Genius® fluid dispense tips are produced in our own silicone-free facilities, and are subjected to stringent quality control inspections throughout the entire manufacturing process.
Perfectly Straight
PosiLok™ polypropylene hubs with passivated stainless steel dispensing tips handle a wide range of fluid dispensing and applications. Available in 1/4″, 1/2″, 1″ and 1-1/2″ lengths, with internal diameters from 0.060″to 0.004″.
Straight but Flexible
PosiLok™ flexible polypropylene tubing reaches into hard-to-access areas and will not scratch delicate surfaces. Easily cut to size or angled as needed.
Tapered PosiLok™ FreeFlow™
PosiLok™ FreeFlow™ tapered tips provide fast, smooth application of medium to high viscosity fluids – especially thick or particle-filled materials like epoxies, RTV silicones, and even brazing paste.
Available in three styles:
- Flexible translucent tips are molded of polyethylene and a light-blocking additive that protects UV-sensitive fluids.
- Rigid opaque tips are molded of polypropylene, and the opacity of the material delivers light-blocking functionality to protect light-sensitive fluids.
- Proprietary plastic tips are formulated for non-bind/no-stick dispensing of cyanoacrylate adhesives.
Precisely Bent
General Purpose tips bent both 45 & 90 degrees are available in 0.5,” 1” and 1.5” lengths.
Fine Surface – Chamfered Tips
Chamfered tip orifice facilitates insertion between delicate surfaces. Smaller sizes are useful when making microdots through low-viscosity fluid dispensing. Tips decrease fluid wicking during fluid dispensing.
Teflon®*
Flexible Teflon® tubing reaches into hard-to-access areas and will not scratch delicate surfaces. Easily cut to size or angled as needed. Ideal for use with cyanoacrylate adhesives.
Teflon®* Lined
Teflon® burr and flash-free tips assure accurate deposit control. Recommended for use with fluids that react to bond with metals, such as cyanoacrylates. The tips prevent scratching.
* Teflon is a registered trademark of DuPont Corporation
Suggestions:
- Shorter is Better
SmartDispenser® Systems perform best with shorter tips and the largest gauge possible. - Don’t Choke Fluid Flow Rate
A 14g tip will dispense the same volume as a 27g tip when using AirFree® technology. The difference is the 14g will take a second to dispense, while the 27g will take 3 minutes.
Genius® PosiLok™ Tips
- Made in silicone-free facilities.
- Stringent quality control.
- Free of molding flash & burrs.
- Free from contaminants.
- Consistent lot to lot.
- Process control & traceability.
