Videos
SmartDispenser® Informational Videos
SmartDispenser®Two Component Fluid Dispenser
AirFree® component (2K) mixing technology that uses any 50ml or 75ml two component cartridge system provides programmable process control replacing hand-operated “by eye” fluid dispensing.
AirFree® Fluid Dispensing Delivers the Lowest Total Cost of Ownership
Fishman Corporation’s patented AirFree® dispensing technology reduces the total cost of ownership by reducing costs associated with process control, maintenance, and energy for the lifetime of the SmartDispenser® fluid dispensing system.
Fishman® In The News – Organovo
This video shows how Organovo, the industry leader in Bio-Printing technology, uses the Fishman Linear Drive System in the dispensing of human cells.
SmartDispenser® Introduction – Operating Modes – Traditional Mode & ProcessControl2®
Mode
The SmartDispenser® benchtop system, benchtop automation system and the SmartDispenser® automation integration kit feature two operating modes. Traditional LDS900® Operating Mode and ProcessControl2®. This video explains the difference between the two modes of operation
SmartDispenser® Introduction – Performance Platform – Closed Loop
Each SmartDispenser® fluid dispensing system is designed to communicate with an A & D Company’s AD4212B Analytical Weighing Sensor. The SmartDispenser® administrator may activate the weighing sensor option in the administration section of the SmartDispenser®. The weighing sensor may be used in line during production or set up as a calibration station in the quality control department.
SmartDispenser® Introduction – Performance Platform – Linear Drive System
The SmartDispenser® fluid dispensing system combines three platforms: Performance, Communication and Ease of Use. In the video, the viewer is introduced to one half of the performance platform: the Linear Drive System. The Linear Drive System provides the highest repeatability of any fluid dispenser available today.
Why are 30 Days Needed to Evaluate a Fluid Dispenser?
All evaluation programs are about mitigating the risk of purchase. This video, will explain how advancements in fluid dispensing technology have allowed more efficient methods of demonstration, saving time and money when considering a fluid dispensing system.
The SmartDispenser® fluid dispensing system combines three platforms: Performance, Communication and Ease of Use. In the video the viewer is introduced to one half of the performance platform: the Linear Drive System. The Linear Drive System provides the highest repeatability of any fluid dispenser available today.
Why are 30 Days Needed to Evaluate a Fluid Dispenser?
All evaluation programs are about mitigating the risk of purchase. This video will explain how advancements in fluid dispensing technology have allowed more efficient methods of demonstration, saving time and money when considering a fluid dispensing system.
Don’t Be That Guy!!
We all have that beloved ‘technology-adverse’ person in our families. Nothing is ever as good as it was way back in the day! Well those of us who embrace technological advancements and know how to apply them, appropriately understand what a positive impact they make on our daily lives.
21st Century Dispensing
What makes it so smart? The answer is control and monitoring of a consistent repeatable assembly fluid deposit worldwide, resulting in increased bottom line profits through higher productivity, fewer rejects, less fluid waste and lower production costs
21st Century Dispensing Technology & The SmartDispenser®
This video provides a high level view of how the SmartDispenser® improves your productivity today as well as the infrastructure to take advantage of the technological advancements in the 21st century manufacturing facility.
Learn More
The Evolution of Dispensing
This video takes you through a posthumous look at 35 years of air dispensers failures and how ignoring the root cause of said failures gave birth to the air free SmartDispenser® solving erratic fluid dispensing forever.
Learn More
Medical Device Validation: Standardization and Reporting for Equipment Validation
This video shows how the SmartDispenser® stabilizes the fluid dispensing process, allowing for an enterprise-wide solution for medical device assembly. Automated reporting provides documented traceability to the point of dispense, verifing the assembly fluid for the medical device assembly was delivered within the specified tolerance.
Learn More
SmartDispenser® Priming Station
This video shows how the SmartDispenser® Priming Station assists the LDS Dispense Gun off-line reloading process while the SmartDispenser® Automation System runs production.
Learn More
SmartDispenser® Gun Tray
This video shows how the SmartDispenser® Gun Tray transfers pre-filled syringes are filled off line while production is running, dispense guns from the SmartDispenser® Priming Station to the SmartDispenser® fully automated SDIK or Benchtop Automation System.
Learn More
SmartDispenser® Push-To-ConnectorTM
The Push-To-Connect™ Gun Mount reduces empty syringe change over to seconds. The easy to use connector allows the entire dipense gun to be replace with a simple twist of the wrist. Combine with the SmartDispenser® Gun Tray and SmartDispenser® Syringe Filling System and experience a level of assembly fluid repeatability you never thought possible.
Learn More
SmartDispenser® Lead Screw Protector
This video shows how the Genius® Lead Screw Protector is designed to add an extra layer of protection against dust and contaminants common in manufacturing facilities for both the lead screw and stepper motor.
Learn More
SmartDispenser® Accessory Kit
This video shows how the Accessory Kit secures and protects the SmartDispenser® and allows stacking multiple SmartDispensers
Learn More
SmartDispenser® in Action
SmartDispenser® Closed Loop Dispensing
This video shows how the SmartDispenser® works in conjunction with a scale verifying the proper amount of UV adhesive was dispensed.
SmartDispenser® Dispensing a UV Adhesive
The application was shot in the Fishman® Application Support Lab for a customer’s application. Fishman® provides this type of support for all SmartDispenser® customers. Because the SmartDispenser® is AirFree®, driven by electricity, the performance you see at the Fishman® Application Support Lab will be exactly the same at your facility.
LDS9000® Dispensing Dot and Circle
This video shows the LDS9000® dispensing dots and circles in an automated production cell.
SmartDispenser® in an Automated Production Cell
This video shows a square of 200,000cps assembly fluid being dispensed in an automated productions cell.
How To Videos:
Attach a Lead Screw Protector to an LDS Dispense Gun
This video shows how to attach a SmartDispenser® Lead Screw Protector to an LDS Dispense Gun.
Syringe Filling From a 5 Liter Tank
This video shows how to fill a Fishman® AirFree® syringe through the luer from a 5 liter tank.
How To Stabilize Fluid Dispensing Performance
This video shows how to use AirFree® technology to stabilize the process used to apply assembly fluids to your products in a manufacturing environment.
CA Filling System with 1 Liter Reservoir
Buy your assembly fluid in a one liter container, insert the container into the pressure reservoir, set reservoir pressure, set fill time on the controller and fill Fishman® AirFree® syringes via the luer for production.
Semco® Cartridge Syringe Filler
Buy your assembly fluid in a Semco cartridge, insert the cartridge into the pressure reservoir, pressurize, set the fill time and fill a Fishman® AirFree® syringe via the luer for production.
2 Part Epoxy Syringe Filling System
How to fill a Fishman® AirFree® syringe through the luer from a two-part epoxy side by side 1:1, 2:1, 4:1 or 10:1 cartridge.
Assembly Fluid Syringe to Syringe Transfer
Use this system to transfer inventory of filled air syrignes to Fishman® AirFree® syringes when you replace your air dispenser with an SmartDispenser®
Solder Paste Syringe-to-Syringe Transfer
This video shows how to transfer solder paste from a pre-filled air syringe to a Fishman® AirFree® syringe.
Syringe Filling From a Two-Component Bi-Pack
This video shows how to transfer mixed two component epoxy from a Bi-Pack to a Fishman® AirFree® syringe through the nose.